Load balancing

load balancing laadpalen · dynamische lastverdeling · dynamic load management · équilibrage de charge · gestion dynamique de la charge · smart charging · slim laden

Energy glossary

Load balancing automatically shares the available power between charge points and other loads, so cars charge as fast as possible without overloading your grid connection.

What it means

Load balancing divides the power you have among the devices that need it, mostly charge points. Instead of every car drawing full power at once, a controller checks the total and adjusts each charge point so the site stays under its grid connection capacity.

Think of a restaurant kitchen with a limited number of burners. The chef does not refuse orders; he shares the heat so every dish is ready on time.

Good load balancing also looks at the rest of the building and at your solar panels. When the panels produce a lot, cars can charge faster; when the machines start, charging slows down. Charge points usually talk to the controller through a protocol such as OCPP.

An example

Example (hypothetical): a car park in Ghent has 20 charge points of 11 kW, or 220 kW in total, but only 100 kW is free on the connection. When all 20 cars are plugged in, each gets about 5 kW. When only eight cars are there, each gets the full 11 kW. Nobody has to manage it by hand.

Why it matters for your company

Without control, charge points create the highest peaks on a site, often at 8:00 when everyone arrives. That raises your capacity tariff in Flanders and can force an expensive connection upgrade. Load balancing lets you install more charge points on the connection you already have.

How BeLoaded helps

BeLoaded’s load balancing works with the EVC100 controller, which can share grid and solar power over a CANbus link, and with the BeLoaded EMS for larger sites.

Sources

  1. Vlaamse Nutsregulator – Tips om je verbruik te spreiden met een digitale meter
  2. Vlaamse Nutsregulator – Capaciteitstarief

Updated: 29 October 2026

Frequently asked questions

What is the difference between static and dynamic load balancing?

Static load balancing gives the charge points a fixed share of power, for example 50 kW in total, no matter what the building uses. Dynamic load balancing measures the building's consumption in real time and gives the charge points whatever is left under the limit. Dynamic is more efficient: cars charge faster when the building is quiet and slow down automatically when machines or heating start.

Will my cars still be charged in time?

In most workplaces, yes. Cars usually stay parked for many hours, while they need only part of that time to charge. Load balancing spreads the power so every car gets a fair share. You can often set priorities, for example for service vehicles that leave early. If many cars must be full at the same moment, a battery can add extra power.

Not sure where to start?

Answer four questions and get honest advice for your site, including when a battery is not the answer.